Completed Capable Group project · Toronto
Toronto Full-Home Renovation
This Toronto project connects a kitchen and several bathrooms with an upper terrace, covered outdoor room and wide interior-exterior openings. Structure, drainage, thresholds and weather protection have to be resolved with the interior work.
The completed project
How the interior connects to the exterior
Capable Group completed this Toronto renovation across the kitchen, several bathrooms, the home entrance, an upper terrace and a covered outdoor living area. The finished photographs show a bright interior with repeated material choices and wide visual connections to the exterior.
When a project changes both interior rooms and exterior access, the most important decisions sit at the boundaries—structure, weather protection, thresholds, drainage, floor levels, doors, lighting and the construction sequence.
Island layout, full-height cabinetry, appliance fit, lighting and circulation into adjoining spaces.
Freestanding tub, glass showers, double vanity, skylight, tile and several wet-room layouts.
Covered living area, terrace, entry, large openings, thresholds and weather-facing finishes.
Before construction
Interior and exterior work must be planned together
Openings, terraces and covered areas affect framing, drainage, floor levels and weather protection. Those details need to be coordinated with the kitchen, bathrooms and interior finishes before orders are released.
- Map how people move through the home.Record cooking, seating, bathing, storage, entry and outdoor-use requirements before deciding which walls or openings should change.
- Confirm structure and the building envelope.Large doors, altered openings, decks, terraces and covered areas may affect framing, foundations, waterproofing, insulation and drainage.
- Survey plumbing, electrical and ventilation.Locate existing services, panel capacity, drains, vents, appliance loads and routes before finalizing layouts.
- Lock dimensions before ordering.Coordinate appliances, cabinetry, stone, plumbing fixtures, glass, tile, doors and exterior products from approved drawings.
- Price exclusions and interfaces.Confirm permits, engineering, exterior restoration, tax, allowances, protection and concealed-condition treatment in writing.
01 · Kitchen and outdoor connection
Design the opening and the kitchen together
The island, appliance wall, garden doors and covered outdoor area share one circulation plan. Treating them as separate upgrades can create tight clearances, awkward thresholds or late structural and service changes.
Work involved
- Measure the kitchen, adjoining circulation and door-opening zones as one plan.
- Confirm load-bearing conditions and header requirements before changing exterior openings.
- Coordinate appliances, cabinetry, plumbing, electrical, ventilation, stone and lighting.
- Resolve exterior thresholds, drainage, flashing and weather protection before finish installation.
What changes the cost
The biggest budget variables here are structural and exterior-opening changes, custom cabinetry, stone and appliance packages, electrical, ventilation and plumbing relocation, and deck, roof, drainage and envelope work outside the kitchen.
02 · Primary and shared bathrooms
Set waterproofing and fixture geometry first
A freestanding tub, glass shower, double vanity and skylight make the finished room. Drain locations, slopes, waterproofing limits, ventilation, clearances and service access make it work.
Work involved
- Confirm fixture dimensions, door swings, comfortable clearances and storage.
- Inspect drains, supply lines, ventilation, subfloor and signs of prior moisture.
- Specify waterproofing limits, niches, curbs, slopes and glass support.
- Coordinate skylight or window work with privacy, condensation and the roof or exterior envelope.
What changes the cost
Costs in this part of the project are most sensitive to relocating plumbing and drains, custom glass and detailed tile work, water damage or floor and framing correction, and roof, skylight, electrical and ventilation changes.
03 · Entry, terrace and exterior zones
Carry the renovation through every threshold
Exterior-facing elements need a different durability and water-management standard from interior finishes. The entry, terrace and covered area should be detailed as construction zones, not treated as decorative extras.
Work involved
- Inspect structure, drainage direction, waterproofing, flashing and attachment points.
- Confirm safe guards, stairs, landings, doors and walking clearances.
- Use exterior-rated assemblies and compatible materials at every junction.
- Sequence envelope work before vulnerable interior finishes and final paint.
What changes the cost
Allow extra room in the budget for structural repair or reinforcement, roof, waterproofing and drainage corrections, new doors, windows, guards and exterior cladding, and access, protection and seasonal working conditions.
More project photos
The wider views show the interior-exterior junctions
Additional bathroom, terrace and entry photographs show the thresholds, drainage points, floor levels and finish changes that a single room photograph cannot explain.
Work sequence
Typical work sequence
The work normally starts with measurements, structural and envelope review, then moves through approvals, protected demolition, rough-ins, interior finishes and exterior close-out.
- 1. Existing-condition surveyMeasure affected areas and record visible structure, services, drainage, access and elements that may remain.
- 2. Design and permit reviewResolve room use, openings, drawings, engineering, permit triggers and major product specifications.
- 3. Protection and selective demolitionProtect retained areas, isolate dust and open only the approved scope to verify concealed conditions.
- 4. Structure, envelope and rough-insComplete framing, exterior protection, plumbing, electrical and ventilation before closing walls and floors.
- 5. Interior and exterior finishesInstall waterproofing, tile, flooring, cabinetry, glass, trim, fixtures and exterior finishes in a coordinated order.
2026 Toronto and GTA market range
What could a Toronto renovation like this cost?
These Canadian-dollar market ranges are early planning references. They are not the historical price of this Toronto project and not a Capable Group quote.
Layout, custom cabinetry, stone, appliances, ventilation and structural or service changes shape the total.
Plumbing relocation, waterproofing, tile, custom glass, fixtures and repairs behind finishes are major drivers.
HomeStars uses this broad 2026 Toronto range for a multi-room renovation. Major structure, exterior work or system replacement can require more.
Ask for a written scope that separates interior rooms, exterior zones and shared work. Confirm design, permits, engineering, appliances, tax, contingency, allowances, exclusions, protection and concealed-condition treatment.
Timing
How long could the work take?
HomeStars’ June 2026 Toronto guide uses roughly 4 to 8 months of construction for a full-home renovation, with 2 to 4 months of pre-construction planning. Exterior work, approvals, engineering, material lead times and occupation can change the calendar.
Permit check
Could this work require a permit?
Possibly. The City of Toronto identifies structural or material alterations—including adding or removing walls and creating, enlarging or relocating windows or doors—as permit work. Confirm the exact interior and exterior scope with Toronto Building before construction starts.
Before requesting an estimate
Questions to settle before pricing interior and exterior work
Can these photographs be used to price my home?
They show the type of work and finish level. They cannot confirm your structure, drainage, service capacity, access or concealed conditions, so a firm estimate needs a site-specific scope.
Should the outdoor area be priced with the interior renovation?
Yes when the work shares an opening, structure, threshold, drainage route, electrical work or finish transition. Separating those interfaces can leave exclusions between contractors or scopes.
What should be decided before demolition?
Approve the room functions, openings, structural approach, drainage, major products and permit path first. Demolition can then expose concealed conditions without turning unresolved design decisions into site delays.
What should we send for an initial review?
Send photographs of the interior and exterior sides of each affected area, your city, must-haves, known water or structural concerns and rough timing. Existing drawings are helpful when available.
Your project
Planning a Toronto home renovation?
Send photos of the rooms and exterior areas, note the changes you are considering, and include your rough timing. We will review the information and recommend the next planning step.
Include both sides of doors, openings, terraces or covered areas so the connections can be reviewed.
View Capable Group’s full-home renovation service →
